Purpose of the flight and payload description

The cryosampler is composed by a gold-plated copper finger cooled by liquid nitrogen to 68-73 K which is mounted in a vacuum vessel, pumped by a liquid nitrogen cooled cryoabsorption pump filled with a molecular sieve. Ambient air enters through an orifice located 30 mm below the finger tip which can be opened and closed by a valve. The diameter of the orifice varies in size, to limit the inhaled airflow at any altitude sampled. The cryoabsorption pump maintains a vacuum of better than 0.3 mbar during sampling. Water vapor from a thermally stabilized reservoir is added to the air flow via a stainless steel frit surrounding the orifice. The water vapor condenses on the cold finger and forms a polycristalline ice matrix, which traps all air constituents condensable at 68 K.

Details of the balloon flight

Balloon launched on: 9/25/1980
Launch site: Centre de Lancement de Ballons CLBA, Aire Sur L'Adour, Landes, France  
Balloon launched by: Centre National d'Etudes Spatiales (CNES)
Balloon manufacturer/size/composition: Zero Pressure Balloon  
End of flight (L for landing time, W for last contact, otherwise termination time): 9/25/1980

Samples were collected at a number of altitudes from 33 km down to 10 km.

External references

If you consider this website interesting or useful, you can help me to keep it up and running with a small donation to cover the operational costs. Just the equivalent of the price of a cup of coffee helps a lot.



90